B-DETECTION PLUS™
ONLINE CONTINUOUS AIR QUALITY MONITORING
B-DETECTION PLUS monitors the quality of the breathing air a compressor system produces; measuring CO, CO2, O2 as standard with optional offerings for absolute humidity and residual oil (VOS).

Need assistance with selecting the correct solution to meet your specific requirements?
To see the entire Breathing Air Brochure
B-DETECTION PLUS s

CONTINUOUS ALL-IN-ONE AIR QUALITY MONITORING
Ensures 24/7 compliance with the NFPA 1989-19 Breathing Air Quality Standard. The BAUER B-DETECTION™ PLUS continuous air quality monitoring system measures the quality of the breathing air produced by the compressor system in real-time every time the compressor is running. The system measures CO, CO2, O2, N2, Dew Point, and VOC content and compares the actual values vs. NFPA Standards for Breathing Air.
Prevents contaminated air from ever reaching your SCBA. If at any time the NFPA-prescribed air quality values are out of spec, the B-DETECTION™ control unit displays a visual warning and prevents contaminated air from passing into the SCBA or storage cylinders. At the same time, the app automatically sends out push notifications to fire department designated personnel via SMS text and/or e-mail.
Cloud-connected with automatic record keeping. All measured air quality metrics are continuously uploaded to the BAUER B-DETECTION™ cloud-based app where they become proof of compliance with the applicable Breathing Air Standards of NFPA 1989-19. Customers are able to monitor their compressor's air quality remotely via the app and to run historical reports of air quality going back 5 years. Records are kept for a total of 10 years.
B-DETECTION PLUS s FOR INTEGRATION INTO COMPRESSOR SYSTEMS
B-DETECTION PLUS s can be integrated onto your new BAUER compressor system at the factory or can be built for wall mount installation. To ensure optimum operating conditions for the sensors and maximize service life, B-DETECTION PLUS s is installed downstream of the breathing air purification system.
A single control unit for all components: So convenient — simply read off the current air quality values from your B-DETECTION PLUS s control unit. You can also make any changes to your B-DETECTION PLUS s convenient touchpad control.

B-DETECTION PLUS m
MOBILE AIR MONITORING ANYWHERE, ANYTIME
B-DETECTION PLUS m is a compact, portable all-in-one solution that gives you the freedom to perform reliable breathing air measurement wherever and whenever you need to.
Like the stationary models, the B-DETECTION PLUS m delivers completely reliable, ultra-precise readings to monitor compliance with NFPA limits for CO, CO2, 02 and — optionally— absolute humidity and total oil values (VOC).
B-DETECTION PLUS m offers an array of measurement options. The gas sampling unit supplied as standard is used to measure air quality in breathing air cylinders. Optionally, measurement can also be performed directly at the compressor. As a further option, intake air can be measured before it enters the compressor.
The control unit allows a tailored measurement profile to be selected for measuring air directly from the compressor or air cylinder.

The transport case offers IP65-rated protection against dust and water jet ingress and withstands harsh environmental conditions. Sensors are rapidly and easily accessible, simplifying maintenance.
An integrated data logger with SD card functionality ensures data is accessible for future use. The patented special design of the dewpoint sensor delivers an extrarapid response for virtually instantaneous humidity measurement.
The system offers fast venting to allow the gas sampling unit to be quickly detached from the air sampling connector.
If limit values are exceeded, the B-DETECTION PLUS m control unit activates visual alarm signals.
